Skylt lacquer for oak ultra matt non-reflective order online at Industrial-Home

Skylt lacquer for oak ultra matt non-reflective


Skylt lacquer is a lacquer that protects wood against external influences. It is a unique product that forms an almost invisible, ultra-matt layer on the wood. This finish lacquer gives a beautiful natural look to the wood (if untreated) and at the same time optimally protects against wear and stains. Skylt is odorless, easy to apply, smooth and does not yellow. The dry layer is elastic, tough and impact resistant. Surfaces treated with Skylt can be easily cleaned.

In stock

on wish list

Pay with

Industrial Home Payment Methods Pdp

Product information

Advantages of Skylt lacquer:

Preserves the natural look of the oak, no yellowing
Easy to clean
Scratch-resistant top layer
Invisible: the surface appears untreated
Gloss < 5% - stays ultra-matte even at low viewing angles, does not reflect
Suitable for all types of wood
Easy to apply with a fiber roller

Process painting with 0.5 liter Skylt pot:

Working temperature should be between 15 and 25 C.
Humidity between 50-60% relative humidity (RH)
Lightly sand the wood with 300-400 grit wood sandpaper
Cleaning, de-dusting, possibly vacuuming
Open the jar and empty the complete bag of hardener into the jar, mix well in the jar (both are already in the right proportion to each other)
Let it rest in the pot for 10 minutes, the harder will bind with the lacquer
Apply 1st layer and all layers with a fiber roll 9mm microfibre roll 15cm roll:
(for sale at hardware stores such as gamma/praxis etc)
Smooth out the lacquer layer well, roll out the lacquer, in such a way that there is the same amount of lacquer everywhere on the wood.
Leave the pot closed as much as possible / put the lid on / because the paint dries out
Let the first layer of paint dry/cure for 3 hours, wrap fiber roll in foil so that it does not dry out
Do not sand the first coat of paint
Stir / shake the lacquer in the pot every now and then
Apply 2nd layer with the same roll of microfibre roll
Let it dry/cure for 3 h, wrap the roll in foil so that it does not dry out
Lightly sand the second coat of lacquer when it has cured with grit 300-400 (this step is important for a smoother end result)
Remove dust with a dry cloth, not damp!
Apply 3rd layer with the microfibre roller
Let it dry/cure for 3 hours
Lightly sand with fingertips where necessary, with grit 300-400., clean the table with a dry cloth, not damp!
Do not use the table intensively for 1 week / do not set up heavy things / can be used normally
The table is now protected against stains and is easy to keep clean, do not use soap then the table will reflect again, just wipe with a damp cloth.

Skylt conditioner spray:

Use the Skylt conditioner spray once a week on the entire table and wipe with a damp cloth
Never clean the table with soap, the table will then reflect again after a while because of the soap residue
The Skylt lacquer and Skylt Conditioner spray can be ordered at


6 kg


0 reviews